Supply & apply Protection Screed 50mm Thick - 250 OPC - per M²

Supply & Apply of the Liquid Silicone Waterproofing Coating per M²

Pack of 4pcs - Quick removal of mortar stains, oil and grease, wax and fungi from brick work,concrete,asbestos, ceramic tiles&marbles

One coat of cold Bituminous Primer
One layer 4mm thick SBS Membrane

Supply and apply of approved quality waterproofing system for all substructure concrete:
1 - One coats of cold Bituminous Primer
2 - Supply and apply two layers of waterproofing membrane SBS 4mm thick.

SAB® Liquid waterproofing system for wet area:
1- Liquid applied polyurethane waterproofing membrane - UV resistant (2) coat

is a one component, capillary crystalline, waterproof coating, which waterproofs concrete structures by forming insoluble crystals in concrete capillaries.

is a multi-substrate spray adhesive prepared from synthetic rubber and special additives developed for foam and matrasses industries

Is an opaque aqueous white liquid, externally plasticized polyvinyl acetate emulsion of medium to high viscosity

Supply and apply of approved quality waterproofing system for all substructure concrete:
1 - One coats of cold Bituminous Primer

Is an emulsified bituminous coating modified with 10% rubberized polymer content

Responding The Green Building Regulation.

Supply and apply of approved quality waterproofing system for roof (Combo Roofing System) .

1- Polyurethane foam for thermal insulation , 65-70 mm thick and density 40-45 Kg/m3.
2- Rubberized bitumen (2) coat. UV Protection coat.
3- Geotextile /Separation Layer 100 g/m2
4- Concrete screed (26N / MM2 - 300 OPC, 70MM AVE. Thick.) without ice.
5- Angle fillet (cement sand mortar ).
6- filler board/flexible sheet .
7- Expansion joint filter (Backing rod and Pu sealant).
8- Acrylic Top coat final .

Poly - 3040 220kg & ISO- ISOHAR 250KG

1- Supply and Apply Substructure Protection Board 6 mm

Supply and apply of approved quality waterproofing system for the roof (Combo Roofing System).

1- Polyurethane foam, 30 mm thick and density 40-45 Kg/m3.
2- Acrylic - Liquid protection coat (600mic.Thick).
3- Geotextile /Separation Layer 100 g/m².
4- Filler board/flexible sheet.
5- Concrete screed (20N / MM² - 300 OPC, 80MM AVE. Thick.) without ice.
6- Angle fillet (cement sand mortar ).
7- Expansion joint filler (Backing rod + Pu sealant).
8- Acrylic Topcoat final. (light Green).

• Polyurethane foam for thermal insulation, 150-• • • •
• 155 mm thick and density, 45-50 Kg/m3.
• Liquid U.V protection coat (600mic.Thick).
• Geotextile /Separation Layer 120 g/m2
• Filler board/flexible sheet & cement stand mortar.
• Concrete screed (25N / MM2 - 300 OPC, 80MM AVE. Thick.) without ice.
• Angle fillet (cement sand mortar and SBR bonding agent).
• Expansion joint filter (Backing rod and Pu sealant).
• Acrylic Top coat final .

PENEPLUG® is a rapid setting, integral crystalline cementitious waterstop designed to stop active water leaks and moisture ingress.

is a unique bentonite infused butyl rubber sealing compound designed to expand rapidly when exposed to moisture

crystalline and hydrophobic waterproofing admixture for concrete

APP modified bituminous membrane - Plain

Bituminous Membrane NEOFELT 4mm 1x10 m2
Fiber Reinforced Polymer Modified Bituminous Membrane

APP Modified bituminous membrane, reinforced with non woven polyester mat The polyester combines high tensile strength and elongation

APP Modified Bituminous Membrane, Reinforced with Non Woven Polyester Mat

Packaging -- 1.5 kg x10 per carton
RAK FILLER Filler is a chemically modified cementitious powder

Acrylic Waterproof with Fibre - Green

Plug cement & starter